Andersen [105] TriGrip™ Indoor Wiper/Finishing Floor Mat - Nylon Face - Rubber Backing - 3/8" Thickness

Available Mat Colors - (Click Swatch For Larger Image)

* These colors are available in 5' widths only. ** These colors are available in 5' & 6' widths only.

↑ Back To Top

Full Specifications

Features:

• Heavy 100% anti-static nylon face offers outstanding absorption and durability
• Tight, heat-set Ultra-Twist yarn construction resists packing and crushing. Dirt filters into the mat rather than remaining on top
• Green friendly SBR rubber backing has 20% recycled rubber content and is available in smooth or cleated types
• Available with oil and grease resistant 100% Nitrile Rubber backing when applications call for additional protection against oil and grease
• Lutrador primary polyester substrate creates a strong bond between the rubber and carpet
• Outstanding colorfastness - 21 colors available
• SBR rubber backing not recommended for use in areas exposed to grease, or petroleum products
• Pile protected with StainStopper coating to keep mat looking good longer
• Easy to clean: Just vacuum or hose off and hang to dry. Use vacuum and extraction cleaning methods as needed
• Special lengths up to 40' are available
• Certified slip-resistant by the National Floor Safety Institute
• Recommended uses malls, banks, hotels, offices, restaurants, supermarkets and more
• CUSTOM SIZES: May be ordered in lengths up to 40' in whole foot increments only. Priced per Linear Foot.

Physical Specifications:

• SURFACE FIBER TYPE: 2 ply continuous filament acid dyed nylon type 6.6, 6 x 6 twist. Output, heat set
• WEIGHT: 18 ozs./sy
• PILE HEIGHT: 3/8"
• GAUGE: 5/32"
• STITCHES/IN: 10
• CONSTRUCTION: Cut Pile
• BACKING PRIMARY: 4 ozs/sy non-woven polyester
• BACKING SECONDARY: 100% SBR Rubber or 100% Nitrile Rubber
• SECONDARY THICKNESS: .060"- SBR Rubber Body; .060" - SBR Rubber Border; .080" - Nitrile Body .080" - Nitrile Border
• DUROMETER: 60
• TENSIL: SBR Rubber = 1400 PSI; Nitrile Rubber = 1800 PSI

Product Testing:

• Passes Flammability Standard DOC-FF-1-70

↑ Back To Top

Going Green With FloorMatShop

The use of PET Polyester Fiber derived from used plastic drink bottles and rubber reclaimed from used tires reduces landfill waste by over 400 tons annually. It also conserves the natural resources and energy that would normally be required for their production.

Every square foot of a Andersen Eco product eliminates four (4) half liter drink bottles from the waste stream so when a 3x5 mat is used approximately 60 bottles are recycled.

↑ Back To Top

Certifications & Warranty Information

NFSI Certified Slip Resistant

In the marketplace, architects, designers, and specifiers are being educated to select products that are NFSI certified in high-risk areas. It is their assurance that the products have been clinically tested and meet the highest performance standards.

This is just another indication that Andersen is leading the industry with the highest performing, most innovative, and now the safest mats available.

100% CUSTOMER SATISFACTION GUARANTEE

Our 100% Customer Satisfaction Guarantee means that you can partner with FloorMatShop.com and the Andersen Company knowing that we will always stand behind our products and services.

In the mat industry, Andersen mats are where design and function come together, where quality isn't compromised to meet a price point, and where solutions to your maintenance and decor problems come first.

All Andersen mats feature a 100% customer satisfaction warranty for the life of the product!

↑ Back To Top

Maintenance & Cleaning Recommendations

1. Vacuum Daily

• Interior mats are constructed with either nylon or olefin surfaces designed to wipe residual soil, dust and moisture from shoes
• They are most effective when used in conjunction with high performance entrance mats
• They should be vacuumed daily using either a dry or wet/dry vacuum

2. Routine Maintenance

• As needed, interior mats should be cleaned and/or spot cleaned using a neutral cleaner followed by rinsing
• If the mat becomes wet during the cleaning process, it should be allowed to dry thoroughly before returning to service
• Nylon mats will require a longer drying period and should be positioned where they can drain during the drying process

3. Deep Cleaning

• Interior mats can be deep cleaned using any method used for carpeted floors
• Andersen recommends using a neutral, solvent free cleaner if possible
• In the event a solvent is used for removing oil, grease, or gum type spots, take care to thoroughly rinse the solvent from the mat before it is allowed to dry for return to service

4. Floor Preparation

• As with entrance mats, prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned to remove dust and dirt
• This will allow the mat to grip the floor more effectively reducing mat movement with traffic. Why does the floor get discolored underneath a floor mat?

↑ Back To Top