Andersen [265] WaterHog™ Masterpiece™ Select Indoor Scraper/Wiper Entrance Floor Mat - Rubber Border - 1/4" Thickness

Available Mat Colors - (Click Swatch For Larger Image)

↑ Back To Top

Full Specifications

Features:

• 100% Guardian 10 BCF Polypropylene has superior stain resistance excellent durability and outstanding colorfastness
• Unique ridged construction effectively traps dirt and moisture beneath shoe level
• Exclusive rubber – reinforced face nubs prevent pile from crushing in high traffic areas, maintaining high performance and extending product life
• Premium 28 – ounce anti-static polypropylene fiber system dries quickly and won't fade or rot. When wet, the rubber – reinforced surface allows water to be wicked to the bottom of the mat, below foot traffic providing a slip resistant surface
• Green Friendly rubber backing has 20% recycled rubber content and is available in smooth or cleated backing types
• Exclusive "water dam" border keeps dirt and water in the mat and off the floor, minimizing slip hazards and floor damage
• For Indoor use only
• Certified slip-resistant by the National Floor Safety Institute
• Recommended use indoor entrance areas
• CUSTOM SIZE: May be ordered in whole foot lengths up to 60'. Priced per Linear Foot.

Physical Specifications:

• SURFACE FIBER TYPE: Solution-dyed Guardian 10 BCF polypropylene
• WEIGHT: 28 ozs.sy.
• NUB HEIGHT: 1/4"
• GUAGE: 1/10"
• CONSTRUCTION: Tufted loop pile
• BACKING PRIMARY: Woven Polypropylene
• BACKING SECONDARY: 100% SBR Rubber (20% Recycled Content)
• THICKNESS: .110" = Border, .190" - Nubs
• DUROMETER: 60
• TENSIL: 1400 PSI

Product Testing:

• Passes Flammability Standard DOC-FF-1-70
• Electrical Resistance –IBM (Surface to Ground) ASTM F -150 & NFPA 99 Chapter 12 Secton 4.1.3.8 (6) (7), 1990. Average Electrical Resistance at 70° and 50% Relative Humidity: 2.3 x 1012 ohms
• Passes AATCC Test Method 134-1991 Electrostatic Propensity of Carpets. Maximum Voltage Positive 0.2 KV

↑ Back To Top

Going Green With FloorMatShop

The use of PET Polyester Fiber derived from used plastic drink bottles and rubber reclaimed from used tires reduces landfill waste by over 400 tons annually. It also conserves the natural resources and energy that would normally be required for their production.

Every square foot of a Andersen Eco product eliminates four (4) half liter drink bottles from the waste stream so when a 3x5 mat is used approximately 60 bottles are recycled.

↑ Back To Top

Certifications & Warranty Information

NFSI Certified Slip Resistant

In the marketplace, architects, designers, and specifiers are being educated to select products that are NFSI certified in high-risk areas. It is their assurance that the products have been clinically tested and meet the highest performance standards.

This is just another indication that Andersen is leading the industry with the highest performing, most innovative, and now the safest mats available.

100% CUSTOMER SATISFACTION GUARANTEE

Our 100% Customer Satisfaction Guarantee means that you can partner with FloorMatShop.com and the Andersen Company knowing that we will always stand behind our products and services.

In the mat industry, Andersen mats are where design and function come together, where quality isn't compromised to meet a price point, and where solutions to your maintenance and decor problems come first.

All Andersen mats feature a 100% customer satisfaction warranty for the life of the product!

↑ Back To Top

Maintenance & Cleaning Recommendations

1. Vacuum Daily

• When possible, Waterhog mats should be vacuumed on a daily basis. During periods of inclement weather, use of a wet/dry vacuum may provide a more effective method of daily maintenance.

2. Routine Maintenance

• Spots and non-permanent stains should be removed as needed using a safe non-organic solvent based cleaner
• In the event a solvent based spotter is needed, caution should be taken to rinse the excess solvent thoroughly before returning the mat to service
• Failure to rinse the solvent can result in damage to the rubber backing of the mat
• Periodically, as needed, Waterhog mats should be cleaned using a more vigorous method such as a pressure washer or water hose
• Following the use of this method, the mats should be placed in a position to allow them to drain
• This draining will occur rapidly and the mats will be ready to put back into service in a short time

3. Deep Cleaning

• Waterhog mats may be cleaned by any routine method used for carpeted floors
• This includes wet extraction as well as low moisture extraction methods
• Chemicals used for cleaning should be as solvent-free as possible and following a wet cleaning, care should be taken to rinse the mat as thoroughly as possible
• If a wet system is used, the mats should be placed in a position to drain as much as possible before returning to service

4. Floor Preparation

• Prior to the mat being put back into service, Andersen recommends that the floor where the mat will be placed be cleaned to remove dust and dirt
• This will allow the mat to grip the floor more effectively reducing mat movement with traffic
• The floor under the mats should also be kept as clean and dry as possible to protect the bottom of the mats and reduce mat movement. Why does the floor get discolored underneath a floor mat?

↑ Back To Top